Rotary grinders for loaders and excavators

Bobcat hydraulic breakers rotary grinder attachments Bobcat excavators Pin-on Klac Lehnhoff Bobcat compact loadersBobcat rotary grinder attachments for the company’s compact loaders and excavators are aimed at a wide range of construction, demolition and utility industry applications.

Bobcat rotary grinder attachments for the company’s compact loaders and excavators are aimed at a wide range of construction, demolition and utility industry applications.

The new Bobcat rotary grinders are powerful attachments that consist of a double drum, driven by a completely integrated high-torque hydraulic motor. Quieter in operation compared to equivalent hydraulic or pneumatic demolition tools, the new attachments still grind powerfully in concrete, asphalt or rock. They also transmit relatively low vibration levels to surrounding structures and produce small diameter debris that can be reused.

The design of the new grinding attachments allows them to be used for applications requiring precise removal of material, without damaging adjacent structures. They can also be used for less precise work such as the demolition of walls and other structures; for digging trenches in hard and rocky ground and for preparing asphalt or concrete surfaces for repair.

The three models in the range, the RG20, RG40 and RG60 grinders, provide a choice of cuttings widths and are suitable for use on the larger Bobcat loaders and excavators. The RG20 grinder has a standard cutting width of 565 mm and is approved for use on Bobcat E32, E35, E45, E50, E55W and E60 mini-excavators. The RG40 grinder has a standard cutting width of 625 mm and is approved for use on the E80 excavator and on the Bobcat S205H, S630, S630H, S650, S650H, T190H, T650 and T650H compact loaders. The largest model, the RG60 grinder, cuts to a width of 850 mm and can be used on the Bobcat S770H, S850H, T770H, T870H and A770H compact loaders.

The use of rotary grinders on Bobcat compact loaders or excavators requires the installation of a special applications kit on the machines, the same as that used for mounting Bobcat hydraulic breakers. The rotary grinder attachments can be mounted on Bobcat excavators with Pin-on, Klac or Lehnhoff systems. For Bobcat compact loaders, a Bob-Tach bolt-on frame is used.

www.bobcat.eu

Alain Charles Publishing, University House, 11-13 Lower Grosvenor Place, London, SW1W 0EX, UK
T: +44 20 7834 7676, F: +44 20 7973 0076, W: www.alaincharles.com

twn Are you sure that you want to switch to desktop version?