Industry

Enable a major leap in operational efficiency by giving every asset a unique digital identity

RFID Digital ID 1000x700With Brady Corporation's complete RFID solution, assets in any industrial environment can be given unique digital identities just by applying a label

Hits: 513

Read more ...

Falcon Corporation, ND Western & FHN Consortium partners with Lagos Free Zone

Lagos free Zone 26 AprilA consortium of Falcon Corporation, ND Western Midstream Limited & FHN Gas Limited, has been selected to build, own, and operate a naturalgas distribution infrastructure network within the Lagos Free Zone (LFZ)

Hits: 292

Read more ...

Internal climbing setup enables Potain cranes to fast-track Boston tower

internal climbing 25 MayThe Potain MR 415 and MR 418 A tower cranes are quietly growing along with the building — and also inside it


Forming part of the western parcel of the 4.8-acre Bulfinch Crossing mixed-use development, a stone’s throw from Boston City Hall, the imposing new building tops out at around 565 ft and offers spectacular views over the city and harbor. The innovative approach to its construction was a result of the desire to begin leasing space within the tower as quickly as possible, explained Cori Amadon, vice-president at James F Stearns, the leading crane provider for the project.

Core skills

Using Potain MR cranes on the project was an inspired choice. The interchangeability of their bases with those of its sister ranges, the MD and MDT models, increased the number of installation options for internal and external climbing configurations.

Demolition of an adjoining car park exposed a row of four connected concrete core cells that provided fully enclosed support for the climbing mechanism for the Potain MR 415. The MR 418 A was then added to the outside of the westernmost cell, where it too would soon be largely obscured from view by the steel frame of the tower being built around it.

In collaboration with engineering firm Howard I. Shapiro & Associates, plans were drawn up for each stage of the MR 415’s upward journey. For Phase 1, the initial installation, the crane would be freestanding, with just under 197 ft of mast, and a similar jib length. 

The contractor’s desire for a spacious working platform had left a gap of mere inches around the mast perimeter and the core walls, leaving the riggers with no opportunity to assemble or drop in the mast from above. Instead, the beams were pulled into the bottom of the core through a doorway, assembled at ground level, and then maneuvered into position by crane and/or air tuggers.

The crane climbed another 90 ft during each of the next two stages, with a second diving board added at level 32 during Phase 4 and a third board seven floors later during Phase 5, by which time the structure had reached level 42. For the final push, Phase 6, one last climb of 88 ft would be sufficient to enable topping off in July 2021, with the crane supported by the diving boards on levels 32 and 39.

“One of the unique things about this project is that it has a four-cell system from ground level up to level 25, and then one of the cells ‘disappears’ and it turns into a three-cell core,” Amadon explained. “So, initially we were working internally surrounded by a concrete cell up to level 25, but then we had to come out of that and switch from a four-sided support system to utilising a diving board system on the outside of the core.”

The crane climbed another 90 ft during each of the next two stages, with a second diving board added at level 32 during Phase 4 and a third board seven floors later during Phase 5, by which time the structure had reached level 42. For the final push, Phase 6, one last climb of 88 ft would be sufficient to enable topping off in July 2021, with the crane supported by the diving boards on levels 32 and 39.

“One of the unique things about this project is that it has a four-cell system from ground level up to level 25, and then one of the cells ‘disappears’ and it turns into a three-cell core,” Amadon explained. “So, initially we were working internally surrounded by a concrete cell up to level 25, but then we had to come out of that and switch from a four-sided support system to utilising a diving board system on the outside of the core.”

More options with Potain

These smaller, lighter cranes provided further benefits to a project that might once have relied on the use of larger, more costly models.

“By reducing the loads that are imposed, they give you the flexibility to come up with a different type of support system that’s not as cumbersome as would be needed to support a larger tower crane,” Amadon explained. “You can get great results working with an MR 608 (32 t maximum capacity) from the perimeter, but if you put a 24-ton capacity MR 418 into the core of a building with a shorter boom, you can pretty much get the same benefit.”

 

 

Hits: 224

Ma’aden opens its new regional office in South Africa

Maaden 11 MaySaudi Arabian Mining Company (MA’ADEN), Saudi Arabia’s national mining champion has announced the opening of a new regional office in South Africa


The announcement was made at the Mining Indaba Conference, taking place from 9 to 12 May 2022.  

In 2019, Ma’aden strengthened its presence in the African market with the acquisition of Mauritius-based fertiliser distributor, Meridian Group, one of the largest fertiliser distributors in Africa. As a result, Ma’aden has a network of operations across Eastern and Southern Africa, from Malawi to Mozambique, Zimbabwe, and Zambia with 35-65% market share in the four countries. Beyond Meridian Group’s regional distribution operations, Ma’aden’s fertiliser business currently has a direct market share of 48% in East and South Africa combined.  

Robert Wilt, CEO of Ma’aden, commented on the new office, “We are pleased to expand our international presence with a new regional office in South Africa. The announcement reinforces our commitment to the African agriculture market, as it is a strategic growth area for our fertiliser business, and part of our long-term value creation plan to grow Ma’aden into one of the top miners in the world. 

Africa is one of the world’s fastest growing agricultural regions and will generate approximately 30% of global demand for phosphate fertilisers over the next decade. Most of this demand will come from East and South Africa, regions that are near Saudi Arabia. Our new office will allow us to better service South Africa and its neighboring countries, offering supply chain solutions for farmers as we expand our phosphate production volume in the near term to support food sustainability programmes in several African countries.”

Ma'aden’s fertiliser business consists of two mega production plants at 6 MMT annual capacity. As one of the largest suppliers of fertiliser to South Africa, Ma’aden is key player in contributing to food security.  

Hits: 269

BlackBerry joins hand with Midis Group to drive growth in Africa

Blckberry 11 May Midis GroupBlackBerry Limited has entered into a partnership with Midis Group to expand its go-to-market sales motion across Eastern Europe, the Middle East, and Africa

Hits: 198

Read more ...

Alain Charles Publishing, University House, 11-13 Lower Grosvenor Place, London, SW1W 0EX, UK
T: +44 20 7834 7676, F: +44 20 7973 0076, W: www.alaincharles.com

twn Are you sure that you want to switch to desktop version?